The Benefits of Using formwork props for sale

3. Wall

Wall formwork comes in different types and classifications, as outlined below.

Goto Zolo to know more.

Conventional
Conventional wall formwork consists of boards or sheets and squared timber. It is flexible, but it can be costly and time-consuming as each component must be assembled on-site. In addition, all of its parts should be made according to the project&#;s specifications, and they must be nailed together and dismantled again after concreting.

Girder

This is a better version of the conventional formwork. Its components, which usually consist of dimensionally stable girders with two chords and one web, have been standardized to facilitate the assembly of identical and ready-to-use panels. The connection of the panels has also been systematized.

Frame
This type of wall formwork helps reduce labor time since its essential components (forming face, support for forming face, and steel walers) are assembled as one panel. The profile nose of the frames protects the edges of the forming face, thereby extending its lifespan. Connecting devices are used when assembling the frame panels to large-sized units, which are then usually transported by crane.

Crane-independent (hand-set)

This type of formwork can be moved by hand. Because of weight considerations, it is usually made of aluminum or plastic. It can take less concrete pressure than crane-dependent formwork, and is often used in housing and municipal construction projects.

Crane-dependent 

Crane-dependent formwork systems feature a large frame and formwork panels, usually made of steel. As a result, they cannot be moved manually. Since they can resist more fresh concrete pressures than crane-independent forms, they are suitable for the construction of commercial buildings and other extensive infrastructure projects.

Two-sided
As the name implies, two-sided formwork is erected on both sides of the wall. Its formwork ties, which are usually sleeved by spacing plastic tubes so they can be reused, take up the fresh concrete pressure. Push-pull props or large heavy-duty braces are attached to the formwork to align and secure it against wind loads during operation.

Single-sided
Single-sided formwork is used when the concrete has to be poured against existing structures or when builders need to do concreting against a hill or soil. This is why it is most suitable for reconstruction jobs. With this type of formwork system, concrete pressure is transferred from the formwork to the base plates through a support structure. 

Prefabricated
This formwork consists of two prefabricated concrete panels which are assembled in advance, and then transported and filled with concrete on-site. Braces and push-pull props are often used to secure the walls, while working and safety scaffolds are installed with the help of special adapters to make the construction process more cost-effective. Prefabricated formwork helps minimize project duration and labor costs. However, pre-planning is required to ensure that it is transported safely to the site.

Circular
Circular formwork is designed for the construction of curved and polygonal walls. It is also quite useful in the construction of specific concrete structures, such as septic tanks and car park ramps. This formwork system comes in three different types:  

• Round girder &#; timber spacers are added between the timber girders and steel walers so the formwork can be adjusted to the required radius. 
• Flexible girder &#; ideal for the construction of curved walls with different radii. It comprises timber/steel girders and a spindle, which allows builders to adjust the formwork to the required radius without having to reassemble the panels.
• Polygonal &#; existing &#;flat&#; frame formwork panels can be refurbished as polygonal formwork by adding supplementary radius panels and rails, allowing builders to minimize their project costs.

Climbing
Climbing formwork is quite useful in the construction of high-rise concrete structures, such as control towers and skyscrapers, because it climbs with the wall. It comprises large wall formwork mounted to a climbing scaffold. There are three different types of climbing formwork:

• Crane-dependent &#; the climbing unit (scaffold and formwork) requires the use of a crane to reach the next cycle.
• Self-climbing &#; an automatic climbing system that does not require the use of a crane to reach the next suspension point. Hydraulic rams/pumps lift the scaffold, secondary platform, and formwork to the next pouring cycle. It is ideal for the construction of very tall concrete structures.
• Slipform &#; a two-sided formwork that slides upwards along the structure being built at a rate of 20&#;25cm per hour. A system of pipe rods, which is integrated into the already-set concrete, supports the slipform.
   

MEVA is an industry leader offering a wide variety of wall formwork systems that provide highly efficient shuttering, flexibility, and reliability. Our products are lightweight and easy to assemble, and therefore will facilitate the rapid completion of your construction projects. Click here to learn more.

Product Description

The Steel Prop is a support device widely used for supporting the vertical direction structure, that adapts to the vertical support of the slab formwork of any shape. It is simple and flexible, and the installation is convenient, economical, and practical. The steel prop takes small space and is easy to store and transport.

Steel Prop are commonly used to support and strengthen buildings or other structures. They can be used to support heavy objects suspended from high places, such as cranes, Bridges, and pylons.

 

 

The production process of scaffolding steel prop is complex and cumbersome, including the following:

Inner tube: Cutting Tube&#; Punching&#; Welding Bottom Plate.

Outer tube: Cutting Tube&#; Rolling Threaded Tube&#; Punching Oval Hole&#; Welding Threaded Tube&#; Welding Bottom Plate.

Accessories: G pin&#; Forged Pin&#; Nuts (coated sand/precision casting)&#; Handles.

Surface Treatment: Hot-dip galvanized.

Assembly&#; Reaming&#; Labeling&#; Palletizing (steel tape) &#;Labeling&#; Loading Container&#; Make Inspection Photos&#; Make Loading Photos.

 

Advantages of steel support:

1. The design of the steel support structure is reasonable and safe.

2, the actual installation and disassembly is convenient.

3, the actual operation is convenient, fast, practical, efficient, and safe.

4, the project cost is greatly reduced.

5, its wide range of applications.

6. Convenient transportation.

 

 

The Type of scaffolding Prop

Middle East Type Prop

Adjustable Height
(mm)

Inner Tube OD
(mm)

Outer Tube OD
(mm)

Thickness
(mm)

Surface Treatment

-

48

60

1.8/2.0/2.2/2.5/3.0

Painted
Powder Coated
Electric galvanized
Hot Dip Galvanised

-

48

60

1.8/2.0/2.2/2.5/3.0

-

48

60

1.8/2.0/2.2/2.5/3.0

-

48

60

1.8/2.0/2.2/2.5/3.0

Italian Type Prop

Adjustable Height
(mm)

Inner Tube OD
(mm)

Outer Tube OD
(mm)

Thickness
(mm)

Surface Treatment

-

48

56

1.6/1.8/2.0/2.2

Painted
Powder Coated
Electric galvanized
Hot Dip Galvanised

-

48

56

1.6/1.8/2.0/2.2

Additional reading:
Powder Coating Cost

The company is the world’s best formwork props for sale supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

-

48

56

1.6/1.8/2.0/2.2

-

48

56

1.6/1.8/2.0/2.2

Spanish Type Prop

Adjustable Height
(mm)

Inner Tube OD
(mm)

Outer Tube OD
(mm)

Thickness
(mm)

Surface Treatment

-

40

48

1.6/1.8/2.0/2.2

Painted
Powder Coated
Electric galvanized
Hot Dip Galvanised

-

40

48

1.6/1.8/2.0/2.2

-

40

48

1.6/1.8/2.0/2.2

-

40

48

1.6/1.8/2.0/2.2

Props M

anufacturing S

teps

 

Step 1, CUTTING

Steel pipes (both external and internal) are then cut to size with a +/-1 mm tolerance. Cutting is done using automatic cutting machines: a bundle of pipes is placed on the loader which selects one pipe at a time. It is then loaded on a positioning device and cut precisely at the desired height. Lastly, the pipe is unloaded into a container for the subsequent step.

Step 2, DRILLING

Then there follows the drilling step, which is carried out depending on the type of pipe. Due to the new technologies, the drilling is quick, precise, and burr-free.

Step 3, WELDING

External pipes proceed to the welding step, where - suitably positioned - they are assembled with the base plate and the end is threaded. Once drilled, the internal pipes undergo the same welding process but concerning the plate only.

Step 4, COATING AND GALVANISING

Once welded, the props can be: dip coated, cold-dip galvanized (electrolytically), for a more durable protection with respect to dip coating and for better aesthetic quality, or hot dip galvanized for a basically permanent protection, suitable for all environments and withstanding external atmospheric agents.

Step 5, FINISH

Depending on the product, next come the completion steps including mounting an outer sleeve on the covered threading or a forged steel ring nut.

Step 6, CUSTOMISATION

Customized products are available upon request: for example with a ring nut bearing the customer's colors, or the customization of the prop using stickers bearing the customer's logo.

Step 7, PACKAGING AND SHIPMENT

Once with machining, we proceed to the packaging step. Packages usually come with 40 pieces, strapped. The material is then loaded into a truck or container and shipped.

 

Our Services

1.

Free Samples

2.

The Delivery Time Is 15 Days, And The Customized Products Are 25 Days

3, Support Customized Product Packaging
4, Support Product ODM, OEM
5, Support Online Installation Technical Guidance
6. 24 Hours Online Response To Customers
7. One-Stop Service

 

 

 

Packaging & Shipping

 

Packing By Steel Strips, Packaging Can Be Customized According To Customer Requirements.

 

Company Profile

Hebei SanThriving Company is a professional aluminum formwork accessories and construction fastener manufacturer in China. The factory is located in the Fastener Production Base Site---Yongnian area of Handan, The total area is 30.000 square meters. Since we established a factory until now, There are more than 200 employees in our factory and we have more than 15 years of production experience. We have advanced production equipment and a rich experience research development group. Our unique service is to supply Customised Products for our clients. The main products are Wedge pins, steel props, tie rods and tie nuts, flat wall ties, scaffolding, and aluminum formwork tools, These products are sold all over the world. The services of SanThriving company are Quality First and Service Supreme. We will continue to service our clients in the future. We are sincerely the client if you aren't satisfied please kindly tell us, if you are very satisfied with us then tell your friends and help more people to share our service and products.
 

FAQ

1. Who are we?
We are a professional aluminum formwork accessories and scaffolding accessories manufacturer in China.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. What can you buy from us?
Steel Prop, Pin And Wedge, Scaffolding, Thread Rod, Tie rod and nut, Base jack, and so on.

4. Why should you buy from us not from other suppliers?
Enterprise Advantage 1. Formwork accessories and scaffolding accessories manufacturer. 2. Supply customized products for your client. 3. We can help our clients to choose products, one-stop shoring to reduce client's purchase cost and time costs. 4. Strict Quality Control.

5. What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW, FCA, CPT, Express Delivery;
Accepted Payment Currency: USD, EUR, JPY, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow;

Are you interested in learning more about scaffolding for sale? Contact us today to secure an expert consultation!