4 Advice to Choose a how to cut plastic corner guards

There are instances where you may need to cut down a corner guard in order to make it fit in a desired location. Depending on the specific material, there are a few different methods for cutting a corner guard, each with its own advantages and disadvantages. Below is a description of the 3 most common cutting techniques.

Link to RAITTO

Power Saw

For professional contractors the quickest and most accurate way to cut a corner guard is to use a power saw such as an electric miter saw. Power saws have a tendency to break some brittle plastics like polycarbonate, so it&#;s important to use a fine-tooth saw blade made for cutting plastic and to support or clamp the material properly. As always, only use power tools if you are comfortable and always wear the recommended safety equipment.

Hand Saw

If you don&#;t have access to or are not comfortable using power saws, a hand saw, like a fine-tooth hacksaw, can be a good alternative. You will need to mark a clear line to follow on the corner guard. Once your measurement is marked, cut carefully being sure to hold the corner guards still. This method makes it a little more difficult to make a perfectly accurate cut, but with patience, and a sharp saw, you can create a clean, straight edge.

Snips

While not as common, snips or shears can be a safe and controlled way to cut some type of corner guards. You will again need to mark a clear cutting line, making sure that the line is visible on both sides of the corner guards. Then, cut along the line on each side of the corner guard, meeting in the middle. Please note, some larger corner guards may be too thick to be cut accurately with snips.

Before attempting to cut corner guards yourself, always contact your manufacturer or supplier to see if they provide custom lengths. Many manufacturers will make or cut parts to a custom length at little or no charge, depending on the material and quantity.

We might be biased, but we think corner guards are great additions for any building. They can protect the corners of walls, columns, and other surfaces from damage caused by impact or wear and tear. Whether you have installed corner guards in your home, office, or commercial space, you need to maintain them properly to ensure lasting protection. The expert team at Corner Guard Store is here to unpack some tips for maintaining your corner guards and keeping them in good condition.

Clean regularly

Dirt, dust, and grime can accumulate on the surface of corner guards over time, which can make them look dirty and unsightly. Regular cleaning can prevent this! Use a soft cloth or sponge and mild soap and water to gently wipe down the surface of the corner guards. Avoid using abrasive cleaners or scrubbing too hard, as this can damage the surface of the guards.

If you want to learn more, please visit our website how to cut plastic corner guards.

Avoid harsh chemicals

Your corner guards likely have finishes that work alongside your existing office branding. Harsh chemicals, such as bleach, ammonia, or acidic cleaners, can ruin those finishes. They damage the surface of corner guards, causing them to discolor or degrade over time. To avoid this, stick to only mild cleaners when cleaning your corner guards. If you need to remove stubborn stains or dirt, try using a mixture of baking soda and water or vinegar and water instead.

Note: If your corner guards are used in medical facilities, stick to whatever cleaners are needed to ensure safety for your patients and medical staff. Give us a call if you&#;re worried about those cleaners compromising the look of your corner guards, and we&#;ll be happy to help figure out the best solution for your medical office or hospital!

Check for damage

Corner guards can become damaged over time, especially if they are exposed to heavy impact or wear and tear. Check your corner guards regularly for signs of damage, such as cracks, dents, or scratches. Most corner guards are tough and can take quite a bit of normal wear and tear. However, if you notice any large damage, it might be time to replace the guards as soon as possible to ensure continued protection.

Install properly

Like most things, corner guards work best when properly put into place! Proper installation is key to ensuring that your corner guards provide long-lasting protection. Make sure that you follow the manufacturer's instructions carefully when installing your corner guards, and use the appropriate tools and hardware. If you are not confident in your ability to install the guards properly, consider hiring a professional installer to do the job.

Choose high-quality guards

Finally, choosing high-quality corner guards can make a big difference in their longevity and effectiveness. Look for guards made from durable materials, such as PVC or aluminum, and choose guards that are designed to withstand heavy impact and wear and tear. Investing in high-quality corner guards may cost more upfront, but it can save you money in the long run by providing long-lasting protection and reducing the need for frequent repairs or replacements.

If you don&#;t know where to get started with your corner guard search, let&#;s chat! We have a variety of options to protect any company&#;s corners with lasting products. After all, we&#;re the Wall Protection Warehouse! From stainless steel to brass and everything in between, we&#;ve helped over 120,000 satisfied customers protect their buildings and homes. We also prioritize accessibility. If there&#;s ever any customization needed or if you have questions about making your space more accessible, feel free to give us a call at 800-516- or fill out our contact form. 

For more information, please visit can you paint plastic skirting boards.