How do I operate a 400ML jerry can blow molding machine?

### Preparation .

1. Begin by powering on the 400ML jerry can blow molding machine by flipping the switch to the "On" position.

2. Set the machine according to the required parameters for the 400ML jerry can, adjusting both temperature and pressure controls as needed.

3. Securely place the mold intended for the 400ML jerry can into the machine to ensure it is properly fitted.

### Operation .

1. Insert the appropriate amount of plastic granules into the machine's hopper, ensuring it is the correct quantity for molding the 400ML jerry can.

2. Initiate the machine to commence the extrusion process, where the plastic material is heated and forced into the mold to create the desired shape of the jerry can.

3. During the molding operation, monitor the machine to confirm everything is functioning properly and to detect any potential issues or malfunctions early on.

4. After the jerry can has been fully molded, carefully remove it from the machine and inspect for any defects or irregularities in the product.

### Maintenance .

1. Following usage, ensure to thoroughly clean the machine to eliminate any residual plastic or debris that may impact subsequent operations.

2. Regularly inspect the machine for any worn or damaged components, replacing them as necessary to maintain optimal performance.

3. Lubricate all moving parts of the machine periodically to minimize friction and reduce wear on the machinery.

By adhering to these detailed instructions, you can successfully operate a 400ML jerry can blow molding machine. Always keep safety and proper maintenance as a priority to enhance the lifespan and efficiency of the machine.

If you wish to explore further, please visit epe foam sheet extrusion machine and the eps block molding machine.