Tips for Choosing and Planning a Garden Fence

Deterring animals is one of the best uses for a fence. Below are some tips to consider when fencing your garden. In all applications, the fence fabric can be placed belowground for added protection against burrowing animals.

For more information, please visit Puhuasheng.

There are two factors to consider when deciding on how deep to bury your fence: the animals in your region and the desired height of your fence.

To install a rabbit guard, you can use either a 3-foot or 4-foot post. The difference is that when you use the 3-foot post, you'll have unsupported fabric at the top 4 inches of the fence. With 4-foot posts there will be 8 inches of post above the fabric. Using 4-foot posts may pose a danger to persons due to the posts being exposed. In the case of all other products, the post should be 1 foot longer than the fence fabric for light-duty posts and 2 feet longer than the fence fabric for heavy-duty posts.

When deciding on the fence height, remember this will affect the opening and closing of your garden. Higher fences require either gates or adaptable fence post tabs that easily open and close. A 24-inch to 28-inch fence fabric can be sufficient to keep many animals out. Dogs and other jumping animals may require taller fence structures. And when it comes to deer, a wider netting material is vital to restricting access.

Hi everyone! Good to see you all in the Fitbit Community Forums! &#;

I'm very sorry to hear that some of you are having problems with your Fitbit Altas counting too many steps. Thanks a lot for all that you've tried to get it fixed. I'd like to help you out.

I'd like to share some suggestions in the case you've not tried them:

Are you interested in learning more about Step-in Post? Contact us today to secure an expert consultation!

-Make sure that in your personal settings, your height has been correctly entered. This will affect your step count if the number there is wrong.

-Give your Alta a quick restart. You can easily do this by clipping your tracker to the charger and plugging the charger to a USB port on your computer or a wall charger. Then, Press the button on your charging cable three times within four seconds and your tracker should vibrate and show the Fitbit logo. This will make your tracker to reboot.

-Set up your Alta as a new device. For this, go to the Account section at the top right corner on the Fitbit app and select the option that says "Set up a new device". Follow the on-screen instructions and once you're done, your tracker should be syncing without a problem.

Hope that this helps and if you need further assistance, feel free to let me know. I'll be happy to help you out!

| Community Moderator, Fitbit

Help others by giving votes and marking helpful solutions as Accepted

If you want to learn more, please visit our website Y Post with Teeth.