Unraveling the Mystery of High Purity Titanium Wire: Everything You Need to Know!

How is high purity titanium wire made?

Step 1: Melting and casting.

The first step in creating high purity titanium wire is melting and casting. This involves melting titanium sponge in a vacuum arc furnace and pouring it into a water-cooled copper mold. The resulting ingot is then allowed to cool, making it solid.

Step 2: Rolling.

Once the ingot has cooled, it is rolled to reduce its size. This is done by placing the ingot in a rolling mill and applying pressure to it. The process is repeated several times until the ingot has been rolled to the desired size.

Step 3: Annealing.

After the rolling process, the titanium wire is annealed. This involves heating the wire to a specific temperature and holding it there for a certain amount of time. The purpose of annealing is to remove any stresses that may have been created during the rolling process.

Step 4: Drawing.

The next step is drawing. Drawing involves pulling the wire through a series of dies, each one smaller than the last. This process elongates the wire and reduces its diameter. The wire is drawn several times until it has reached the desired diameter.

Step 5: Cleaning.

Once the wire has been drawn to the desired diameter, it is cleaned. This is done to remove any impurities or contaminants that may be present on the surface of the wire. The wire is typically cleaned using a combination of chemical and mechanical methods.

Step 6: Testing.

Finally, the wire is tested for purity and other quality attributes. This is done to ensure that the wire meets the applicable standards and is suitable for its intended use. The wire may also be subjected to other tests, such as tensile strength testing, to ensure that it meets the necessary requirements.

If you want to learn more, please visit our website High Purity Astm B863 Gr1 Titanium Wire, Molybdenum Boats, Tungsten Copper Plates.