What is China UV laser labeling machine company and Why Do We Use Them?

UV Laser Marking Machines for Marking Plastics

UV laser marking machines are mainly used to mark plastic. UV laser markings can create long-lasting marks on plastic surfaces that are highly resistant to wear and light exposure.

Click here to get more.

UV laser markers can achieve high-speed processing and are suitable for mass production requirements. They are an ideal choice for marking plastic materials.

Get a Free Quote

While using UV laser engraving machine, we should start from the beginning because UV lasers are harmful to our body. Hence, we must do this with caution.

JCZ are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Setup

Before every operation, we must check whether our machine is properly set up or not. Usually, we have to choose a clean and unique place in a room. Normally, A UV laser marking machine contains a control unit which contains the energy source and the laser medium and a laser gun with a stand. The fiber cable is the bridge between the control unit and the laser gun. There is multiple wring system to connect the energy with the laser system. We should keep in mind that the fiber cables carry the photons. So, we must check it before every operation. Side by side, we can check the other wiring setup.

Software Function

EZCAD software for China UV laser marking machine is the most popular computer software. This platform is easy to operate and very friendly. We can convert our CAD file into this software for the marking. Or, if we can also make our design directly on this software. Before installing, we must ensure the laser UV marking machine driver is installed in your operating system. Usually, the guidelines are provided by the manufacturing companies.

Hardware Function

The hardware function is consist of two different units. One is the control unit, and another is the shooting unit. Control unit controls the shooting unit. When we start, we must ensure the control unit is successfully turned on.

The shooting unit has three essential parts. They are the UV laser gun, a stand with measurement scale and a working stage. We must check the 150 x 150 mm of the stage and ensure our gun is at zero references. Let&#;s say we are going to mark on a 25 mm of the workpiece. So, our focal length should go 25 mm higher than the zero references.

Caution

We know UV laser is not good for the human body. It helps to engrave materials. Besides this, UV laser light is also harmful to the eyes. Consequently, we must use protective glass. Moreover, we should not keep any reflective materials near the Laser gun.

Want more information on China UV laser labeling machine company? Feel free to contact us.