What is the SMT process and why should OEMs care?

Original Equipment Manufacturers (OEMs) are organisations that manufacture or sell products to another company. This company then uses these components in part of a wider process to create products for their customers under their own branding. A big part of creating products to sell on to other companies centres around the SMT process.

The company is the world’s best Smt Process Flow Chart supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

What is SMT?

Surface mount technology (SMT) is the process wherein components are mounted onto the surface of a printed circuit board. The components are designed specifically to be directly mounted, rather than hardwired, onto the circuit board for the vast majority of electronics. 

Surface mount technology has been widely used since the 1980s. This is because the SMT process is automated, meaning it saves time and costs for both the manufacturer and the customer. Previous methods used hand wiring through holes between the boards to bring components together, meaning this needed manual labour to do so and of course, risked human error. The SMT process is also more adaptable for technological advances in the future than the through hole wire method.  

Other advantages of surface mount technology include higher component density and smaller components for mounting alongside better performance under pressure. Using surface mount technology also means that either side of the board can have components mounted on it.

What is the typical SMT process?

There are three main steps to the process when it comes to surface mount technology which cover solder paste printing, component placing and reflow soldering.

Solder paste printing

The solder paste printing process is carried out by a machine to ensure accuracy and speed.

During this part of the assembly, a printer applies solder paste using a pre-made stencil of the PCB and squeegees. This solder paste is usually a mixture of flux and tin and it’s used to connect the SMC and solder pads on the PCB.

During this part of the process, it’s vital that each pad is covered in the correct amount of paste. If not, a connection will not be established when the solder is melted in the reflow oven (more on that later).

Controlling the quality of the solder paste printing process is vital. This is because, if any printing defects are left undetected at this stage, they will lead to other defects further down the line. For this reason, the design of the stencil is key and care must be taken by the assembly team to ensure that the process is repeatable and stable. Thankfully, to smooth the process, most solder paste printers have the option of including an automatic inspection.

However, sometimes external machines are used to assess the quality of the printing. These solder printer inspection machines use 3D technology and allow for a more thorough inspection. This is because they check for things like solder paste volume per pad, rather than just the print area.

Components placement

Once the PCB has passed inspection, it moves to the component placement phase of the SMT assembly process.

During this phase, each component that will be mounted on the PCB is removed from its packaging using a vacuum or a gripper nozzle. Following this, a machine places it in its programmed location. Not only are the machines that carry out this process highly accurate, but they’re also incredibly quick. Some of the most advanced machines can place 80,000 individual components every hour.

When all the individual components have been placed on the PCB, they must be inspected to ensure that they’ve been placed correctly. This is an incredibly important step in the process, because if any placement errors go undetected and the parts are soldered into that position, then this can lead to high volumes of rework, which can be both costly and time-consuming.

Reflow soldering

Once the placed components have passed their inspection, the process moves to the reflow soldering phase. During this part of the SMT process, the PCB is placed into a reflow soldering machine (some people refer to them as reflow ovens).

Here, all the electrical solder connections are formed between the components and the PCB. Using heat, the solder paste applied earlier is converted into a solder. Again, accuracy is vital during this stage of the process because if the PCB is heated to a temperature that’s too high, the parts or assembly could become damaged and the PCB won’t function as intended. If the temperature is too low, a connection may not be established.  

To ensure the best results, all PCBs within the soldering machine are placed on a conveyor belt. They’re then heated gradually in a series of zones before being passed through a cooling zone.

To avoid joint defects, the PCBs must stay in each zone for the correct period of time. The PCBs must then also be entirely cooled before they’re handled or moved. If not, they may warp.

After the PCBs have been through the reflow solder machine, they are inspected one final time. This inspection is usually carried out by a 3D automated optical inspection machine (AOI). This is to ensure that the solder joint quality is as expected and that no mistakes have been made during the SMT process. Machines are used for this process because they’re much quicker than humans, and more accurate in their analysis.

How is ABL different?

A tailored service:

ABL Circuits offers a tailored and personal service for all OEMs. We are a one-stop shop for all your PCB manufacturing needs, and can take the entire process from start to end off your hands, or alternatively, assist with an individual aspect along the way. 

Family values

We are a family run business which began modestly at our founder, Mark Leverett’s home. 36 years on, William Leverett is now director and is helping to run the company with his father. Family is at the heart of everything we do, which means you get a personal and passionate service. 

Decades of experience

With over 36 years of experience under our belt, ABL Circuits has a wealth of knowledge across our employees, alongside the newest state of the art technology. As one of the only manufacturers that offer the full start-to-end process, in-house, for PCB assembly, we can help to guide you through every step.

We respect your budget

We work with a range of SMEs and bigger companies and know that it is not ‘one size fits all’ when it comes to budget and delivery. We work closely with each of our customers to understand what they are looking for and how we can provide this in the most cost efficient way, without compromising on quality.

Additional reading:
The history of stone crusher

Want more information on Smt Pcb Turn Conveyor 90 Degree? Feel free to contact us.

If you’d like to find out more about how we work and how we can help you, get in touch for a free quote.

SMT is Surface Mounted Technology, which is the most popular technology and process in the electronic assembly industry. SMT patch refers to the abbreviation of a series of technological processes that are processed on the basis of PCB. PCB means Printed Circuit Board.

 

Process:

 SMT basic process components: solder paste printing--> parts placement--> oven curing--> reflow soldering--> AOI optical inspection--> maintenance--> sub-board--> grinding board--> washing plate.

 1. Solder paste printing: It’s function is to leak the solderless paste onto the pads of the PCB to prepare for the soldering of components. The equipment is a screen printing machine, which is using in front of the SMT production line.

 2. Chip placement: It’s function is to accurately mount the components to the fixed position of the PCB. The equipment is a placement machine, which is using after the screen printing machine.

 3. Reflow Oven: It’s function is to melt the solder paste, so that the surface mount components and the PCB are firmly bonded together. The equipment is a reflow oven, which is using after the placement machine.

 4. AOI optical inspection: It’s function is to inspect the welding quality and assembly quality of the assembled PCB. The equipment is automatic optical inspection (AOI). The order quantity is usually more than tens of thousands, and the small order quantity is checked manually. It can be configured in a suitable place on the production line according to the needs of the inspection. Some are before reflow soldering and some are after reflow soldering.

 5. Repair: It’s function is to repair the PCB that has been detected and failed. The tools used are soldering iron, rework station, etc. Configured after AOI optical inspection.

 6. Sub-board: It’s function is to cut the multi-connected PCBA, so that it can be separated to form a separate individual. V-cut and machine cutting methods are normally used.

 7. Grinding plate: It’s function is to grind the burr part to make it smooth and flat.

 8. Washing the board: It’s function is to remove the welding residues such as flux that are harmful to the human body on the assembled PCB board. Divided into manual cleaning and machine cleaning

 

The advantages of SMT:

1.High assembly density, small size and light weight of electronic products.

2.High reliability and strong shock resistance. Solder joint defect rate is low.

3.Good high frequency characteristics. Electromagnetic and radio frequency interference is reduced.

4.Easy to automate and improve production efficiency. Reduce costs by 30% to 50%. Save material, energy, equipment, manpower, time, etc.

Contact us to discuss your requirements of Pcb Shuttle. Our experienced sales team can help you identify the options that best suit your needs.