Essential Guide to Controlling ESD (Electrostatic Discharge)

Plastics and elastomers are great electrical insulators. By default, they just don’t conduct electricity in their unaltered bulk material state. The vast majority of the ESD-safe (or static-dissipative) products such as coatings, clothing and specialized ESD handling products are polymer-based. 

Want more information on esd protection film? Feel free to contact us.

But by nature, a product cannot be both an insulator and ESD-safe at the same time for reasons that will become clear. So what is it that makes some polymers insulators, while others are classed as ESD-safe, or even electrically conductive?

In this article we'll be examining what makes an ESD product safe, and of equal importance from an industrial perspective, we’ll look at the standards for defining and qualifying an ESD-safe product.

 

Effects of ESD (Electrostatic Discharge)

Just to remind you, ESD, or electrostatic discharge, is the electrical discharge between a statically charged object, and another object of a different potential.

One example you may be familiar with is the case of walking across a carpeted floor in a pair of sneakers and touching a door. If you had experienced triboelectric charging as you walked across the floor, you may have felt a zap on your fingers as you grabbed the metal door handle.

That was the zap of ESD, and while it's annoying when you get shocked by a door handle, the consequences arising from ESD in an industrial setting such as aviation maintenance or electronic assembly work range from being financially expensive (at best) to potentially catastrophic.

Those shocks you feel on the skin when you touch a door handle are of a fairly significant voltage (yet thankfully a small and non-lethal Amperage). If you feel the zap on your skin, it means that the ESD discharge has been at least 2000 to 3000 volts.

Electronics components, such as transistors and integrated circuits however, are significantly less tolerant to voltages, even at low current. A voltage of just 10 volts of static electricity can obliterate transistors on a chip. That’s very small comparatively speaking. And this is why ESD control exists-- to provide permanent protection against even the slightest of discharges.

ESD damage typically occurs from three main types of events:

1. Discharge to the device (from the body)

2. Discharge from the device (when the device charges through contact from packaging and surfaces)

3. From field-induced charge (from regional static fields).

These discharges bring another risk from the sparks themselves. Not only is the hardware at risk from the electrical arcs caused by ESD damage, but the arcs are a potential source of ignition, which can be catastrophic in an environment with explosive vapors, liquids and even solid particulate matter such as coal dust.

Nobody likes electrostatic discharge events, and so an entire industry with its own governing standards has arisen to control ESD damage.

 

ESD Standards and Definitions

There are a range of standards governing the management and implementation of ESD-safe materials. But before that, we need to define what exactly is an ESD-safe material in the wider context of surface resistivity.

Conveniently, there is a standard that defines this also, and this is ESD ADV1.0-2017, which is published by the Electrostatic Discharge Association (ESD). [1] The document’s full title is the “ESD Association Advisory For Electrostatic Discharge Terminology - Glossary”, and it defines conductors, insulators and ESD-safe materials in terms of their surface (and volume) resistivity.

The association defines surface resistivity in the glossary thus:

“For electric current flowing across a surface, the ratio of DC voltage drop per unit length to the surface current per unit width. In effect, the surface resistivity is the resistance between two opposite sides of a square and is independent of the size of the square or its dimensional units. Surface resistivity is expressed in Ω/square.”

Or to put it another way, surface resistivity is the resistance to leakage current along the surface of an insulating material. The higher the surface resistivity value, the lower the leakage current and the less conductive the material is.

Note that resistivity is described as being independent of the size of the sample. This is because resistivity is a property of the material, unlike resistance, which is a property of an object’s geometry as well as being dependent on the material type. Strain gauges demonstrate the relationship between geometry and resistance rather nicely.

ESD ADV1.0-2017 divides materials into three categories according to their surface resistivity:

1. Conductive material -

   A conductive material is one that has a surface resistivity of less than 1 x 10E5

   Ω/square, or a volume resistivity of less than 1 x 10E4 Ωcm. Conductors permit electrons to flow quickly across the surface, or through the volume of the material. To use an automotive analogy, a conductive material is analogous to a racetrack with fast cars zooming around unimpeded by speed limits or traffic.

2. Static dissipative (ESD-safe) -

   A static dissipative material has a surface resistivity of at least 1 x 10E5

   Ω/square, but less than 1 x 10E12 Ω/square. In terms of volume resistivity, a static dissipative material falls in the range of 1 x 10E4 Ωcm and 1 x 10E11 Ωcm. Charge flows more slowly with static-dissipative materials. When an arc occurs, it has lower energy as it tries to reach ground. This is what you want when protecting devices from ESD damage. Back to our automotive analogies, and a static dissipative material can be thought of as a journey in regular traffic, with all the limitations that goes with it.

3. Insulative materials -

   A material that has a surface resistance or a volume resistance equal to or greater than 1 x 10E11

   Ω. Plastics are insulators. They have a high electrical resistance, and charge does not flow through the material. This can be changed by addition of conductive particles into the base plastic. If an insulative material were to have an equivalent driving scenario, it would be stuck in traffic in rush hour, with no exit ramp to get off the highway.

In summary, to be classed as an ESD safe material, the surface resistance of that material must fall within the range of 1x 10E5 Ω/square and 1x 10E11 Ω/square according to ESD ADV1.0-2017.

And that clear definition illustrated in the graphic above, shows why from a regulatory point of view, a material can only exist as either a conductor, insulator or static-dissipative (ESD-safe) material. Resistivity exists as a spectrum, and in this context, a material can only exist at one point in that spectrum.

 

ANSI/ESD S20.20

Now that we have defined materials in terms of their surface resistivity value, let’s look at the main set of standards that determines if a product such as a coating is indeed ESD-safe. The most recent set of commercial standards relating to ESD protection in this context is named “ANSI/ESD S20.20-2021: Protection Of Electrical And Electronic Parts, Assemblies And Equipment (Excluding Electrically Initiated Explosive Devices)”

For more anti static bag manufacturersinformation, please contact us. We will provide professional answers.

…or “S20.20” for short.

This document covers a range of ESD management and control topics including training, product qualification, compliance verification, grounding/equipotential bonding systems, personnel grounding, ESD protected area (EPA) requirements, packaging and marking.

This set of standards is used extensively in the aerospace, automotive, electronics manufacturing and medical industries. It covers electrical or electronic parts, assemblies, and equipment susceptible to damage by discharges greater than or equal to 100 volts human body model (HBM) and 200 volts charged device model (CDM). [2]

 

MIL-STD-1686

For military applications, the set of standards governing ESD control is MIL-STD-1686. The military standard is named “MIL‑STD‑1686-Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (excluding electrically initiated explosive devices)”.

It was first released in 1980 and was one of the first standards pertaining to ESD management and control. It is currently under the control of the US Navy. You’ll notice some similarity between the full titles of the commercial and military standards. The similarities don’t just end there.

There is a big overlap in the Venn diagram of ANSI/ESD S20.20 and MIL-STD-1686 which we won’t cover in this article. But if you are interested in the similarities and differences between the commercial and military standards, this document from ESD Association highlights them side by side for comparison.[3]

Suffice to say that there is enough commonality between the two standards that a product certified to the ANSI standard would likely pass the military standard testing in most aspects. That’s not to say that it automatically qualifies - you still have to test it to the specific standards!

 

What Makes Polymer-based ESD-Safe Products Safe?

Resistivity-Altering Additives

The surface (and volume) resistivity of the polymer can be altered by the use of conductive additives during the manufacturing process.

Traditionally in ESD applications, this was achieved by the addition of carbon black to the polymer, which would result in a darker colored coating. Metal powders such as Al, Au, Ag, and Cu and stainless steel can also be added to make polymers more conductive.[4]

So how exactly do these additives alter the electrical properties of polymers? In the case of carbon additives, manufacturers utilize what is known as conductive carbon black, which is manufactured in industrial furnace processes. Carbon black is intrinsically a semiconductor, so from an electrical point of view, addition of such an additive results in the formation of two interpenetrated networks: the conductive additive network, and the resistive polymer network. This principle applies to polymers filled with other conducting fillers too.

The electrical conductivity of filled–polymer compounds such as ESD-safe coatings depends on the structure of the additive particles, the size, and also depends on process parameters such as mixing time.[5] A higher mixing time results in better dissipation of the additive into the polymer, and hence a more even and consistent conducting matrix.

The other ways of achieving the ESD safe property is by using antistatic additives such as Static-dissipating polymers and Surfactant-based ESD agents.  Static-dissipating polymers provides long-term ESD levels by forming a clear coat on the surface such as Techspray Licron. Surfactant-based ESD additives, which have a partially hydrophilic structure that attracts a film of surface water that lowers the resistivity of the part, allowing excess electrons to dissipate. Both of these antistatic materials can be applied directly to the surface of the finished article from an aqueous and/or alcohol solution as a spray or dip.

 

Summary

We know what resistivity is and how it relates to ESD protection, we know that additives alter the electrical properties of polymers due to the formation of conductive networks formed from the dissipated additives in the polymer.

And from a regulatory perspective, we are now clear on the main standards applying to ESD control for both industrial and military applications.

That’s the who, what, where and why as far as manufacturing and defining requirements of ESD-safe materials.

If you’d like to know more about specific ESD-safe, clear coatings for your applications, then head on over to the ESD products page for more information.

 

 

References

[1] ESD ADV1.0-2017 - ESD Association Advisory for Electrostatic Discharge Terminology – Glossary

[2] ANSI/ESD S20.20-2021: Protection Of Electrical And Electronic Parts, Assemblies And Equipment (Excluding Electrically Initiated Explosive Devices)

[3] ESD Standards Direct Comparison

[4] Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters, Eun-Soo Park,Lee Wook Jang,Jin-San Yoon, Journal of Applied Polymer Science

[5] A comprehensive picture of the electrical phenomena in carbon black–polymer composites, I. Balberg, Carbon Journal

Samples were immersed in the specified chemicals for 24 hours at room temperature and then examined visually.

9800 ESD film is a transparent, static dissipative, self-adhesive polyester film. It includes a special coating on one side and a release film on the other side. The film can be applied to flat, insulating surfaces.

Advantages

• High tear strength, clear, adhesive-backed polyester film
• Permanently electrostatic-dissipative coating
• Complies with EN 61340-5-1
• Humidity independent
• Very low tribocharge generation and excellent electrostatic decay performance
• High clarity, good chemical and abrasion resistance
• Ideal for PCB manufacturing and testing
• Suitable for clean manufacturing applications (retrofitting cleanroom windows, etc.)
• Can be used as transparency for copies
• Thickness: 0.1 mm
• Maximum sheet/roll width: 1220 mm

Property Test method Unit (100 microns) Tensile strength MD ASTM D-882A PSI 25,000 TD ASTM D-882A PSI 35,000 Yield strength MD ASTM D-882A PSI 14,000 TD 14,000 Elongation at break MD ASTM D-882A % 200 TD 120 Pencil hardness Hardness ASTM D-3363 Hardness scale 3H Optical Transmittance – Total visible ASTM D-1003 % 85 Transmittance – Total UV 10 Haze 7.3

MD = Machine Direction | TD - Transversal Direction

Micro Suction Silicone adhesive

For easy manual application of the foil we have developed a Micro Suction Silicone adhesive. This adhesive has a number of advantages that make the film easy to position. Our advise is to use standard adhesive only for laminating machines or very very experienced people, else use this Micro Suction Silicone Adhesive

Benefits

• Reusable / Repositionable
• Never attach permanently
• Easy to apply by hand, less bubbly

Please note : ESD foil with Micro Suction Silicone adhesive has a thickness of 230 micron / 0.23 mm.

Please note: in exceptional cases, the top layer can be affected by acids, for example from the human skin. To protect the conductive layer, you can apply a transparent film or use the adhesive side on top.

Small optical defects are allowed in this product. If you require a product that is absolutely free from optical defects, please contact us for the "superior selected quality". Due to the extreme caution needed to produce these products, they can be several times more expensive.

Are you interested in learning more about large vci bags? Contact us today to secure an expert consultation!